2X Powder Hopper Tube™
"Super Size" your powder hopper!
2X Powder Hopper Tube™
Precision Powder BafflePrecision Powder Baffle in Use
Click to enlarge image(s)
If you reload large capacity rifle cartridges, large quantities of pistol cartridges for competition, or use "fluffy" high load density powders like IMR Trail Boss, you know how frustrating it is to have to stop frequently to fill the powder hopper on your Dillon press. Ever wish you could "Super Size" your powder hopper? Now you can! The 2X Powder Hopper Tube™ doubles the powder capacity of your Dillon Auto Powder Measure by replacing the original 7" powder hopper tube with a 14" powder hopper tube.

Fits both the Dillon Auto Powder Measure* and Dillon "Belted Magnum" Powder System!

The 2X Powder Hopper Tube™ is made from high-strength, clear, poylcarbonate tubing that will not stain or discolor from extended contact with most gunpowders.†

Our Precision Powder Baffle™ is included and provides a uniform flow of gunpowder to the powder bar, regardless of the powder level in the hopper. The powder baffle is made from 20 gauge aluminum and is water-jet cut to precise dimensions.

Easy Installation!
Just empty the powder measure, remove the two screws attaching the original powder hopper and lift off the powder hopper tube. Insert the 2X Powder Hopper Tube™ and attach using the original screws. You even get to use your original Dillon powder measure lid.

Compatibility with Dillon Low Powder Senso
If you use a Dillon Low Powder Sensor, it will still fit but will alarm at 50% full unless you modify it with a longer follower rod. Extending the follower rod is easy and inexpensive and instructions are included. These instructions are also available for free download from our "Tips" library for those who want to make their Low Powder Sensor adjustable to alarm at any desired powder level.

Super 1050 Users
Due to the location of the case feed hopper on the Super 1050, there isn't enough vertical clearance for a 14" Powder Hopper Tube. We have an alternative 11" tall Powder Hopper Tube that does fit and yields a 57% increase in powder capacity. Just select the Super 1050 version from the drop-down menu when you place your order.


Standard Version (T1277-14):
14" Powder Hopper Tube
Precision Powder Baffle™
Installation instructions.
Super 1050 Version (T1277-11):
11" Powder Hopper Tube
Precision Powder Baffle™
Installation instructions.


Notes:
* Fits all versions of the Dillon Auto Powder Measure that have two screws attaching the Powder Hopper Tube to the powder measure body. Older Dillon powder measures with the powder hopper tube held in place by epoxy, and not by 2 screws, require alteration for the 2X Powder Hopper Tube to be installed. Such alterations may void the Dillon warranty for your powder measure and is therefore not recommended.


† Staining can occur with Hodgdon TITEGROUP™ gunpowder. When using TITEGROUP™, we recommend that you drain the powder measure when not in use. You can easily drain powder using our Powder Measure Drain-N-Change Tool™.

** Dillon Powder Measure and Micrometer Powder Bar shown in photo are not included.
2X Powder Hopper Tube and Precision Powder Baffle are trademarks of UniqueTek, Inc.
Made in USA Logo

Features Benefits
Doubles Powder Hopper Capacity Less Frequent Interruptions During Reloading Session
Precision Powder Baffle™ is Included Regulates Flow of Powder to Powder Bar
Utilizes Original Dillon Powder Measure Lid Retains Original Parts
Compatible with Dillon Low Powder Sensor
(follower rod must be extended)
Keep Using your Low Powder Sensor
Will Not Stain with most Gunpowders** Maintains Clear View of Powder Level
Submit a Review...