|Click to enlarge image(s)|
Features & Advantages:
• Engineered Specifically for the Dillon XL 650 Press
• Machined from Billet Aerospace Stainless Steel
• Sweges Hardened to 50 Rockwell
• Frame Mounted Swager
• Installs in Just Minutes
• No Need to Remove Rotary Primer Disk or Primer System.
• Fully Resizes the Primer Pocket and Adds the Correct Fillet
• Use your Case Feeder and Swage over 650 Rounds Per Hour
— Small Primer Swage
— Large Primer Swage
— Mounting Hardware
Installs in Just Minutes. Simply remove the Primer Punch and Punch Support Bracket, then Install the Swage It 650 in place of the Punch Support Bracket. It's that simple!
Will NOT Fit on XL 750 Press
The new Dillon XL 750 press has a completely new primer system based on the RL 550 Primer System. The Swage It S650 will NOT fit on the XL 750 and neither will the Swage It S550.
Manufacturer's Unconditional Lifetime Warranty:
You will not be disappointed in the Swage It 650. The manufacturer backs this product with an unconditional lifetime warranty. If your swage ever fails, just send it back to the manufacturer and they will send you another free of charge.
"Just got my Swage S650 and it flat blasted through about 2k 5.56 brass this last weekend. Awesome product."
— Carl T. - Lees Summit, MO (6/6/16)
"After running through roughly 1k pieces of 223 military brass, I can say I'm really impressed. The installation of the swage it was straight forward, running brass was effortless and worry free. After swaging all the brass I only had about 10 rds give me any trouble taking a primer. I will chalk that failure up to bad brass. I don't think theres a better option in regards to the 650 and swaging brass. Furthermore didn't notice any extreme amount of force applied to the shell plate during swaging operation. Id give the swage a 9 out of 10 and the only reason for the 9 is because I haven't had the item long enough to gauge the longevity of the tool."
— Clint Bowen - IDPA 5 Gun Master (2/11/16)
Video of Swage It S650 Installation and Operation.
Tip!: Set up a toolhead for the Swage It S650 with a Universal Decap Die in Station 1 and a Dillon Rapid Trim Case Trimmer in Station 3. This will allow you to decap, swage, resize and trim in one operation … greatly speeding up the process.
|Protected by U.S. Patent No. 9,494,398.|
|Average rating from 1 reviews: 5.0|
GREAT TIME SAVERI just throw the cases in the case feeder with a sizing die installed and start pulling the handle. It is by far the most efficient way to size and swage brass. Unfortunately, I don't own a Dillon case trimmer or I would be able to accomplish 3 tasks at once.
Someday I will be able to afford one.
Submit a Review...