|Click to enlarge image(s)|
Case Gauges allow you to test your reloads (and factory ammunition) before you fire them. There is nothing more frustrating than getting to a competition and then finding out that you have function failures due to your ammunition.
• CNC Machined for Precision
• Machined to SAAMI Minimum Chamber Specs.
• 6061-T6 Aluminum w Red Anodize Finish
This Gauge Will Measure:
— Maximum Cartridge Length (COL)
— Minimum and Maximum Case Length
— Maximum Case Diameter
— Minimum and Maximum Headspace
Easy as 1, 2, 3!
1) Place a clean cartridge into the gauge and make sure that it completely seats by itself with no assistance. If the cartridge does not easily drop into the gauge without assistance, there is most likely something wrong with the dimensions of the cartridge.
2) The head of the brass should sit flush within the lower or upper step of the gauge. If the cartridge sits higher than the upper step, your brass is too long and may not chamber.
3) Also check to make sure the tip of the bullet is not protruding beyond the face of the gauge. If the bullet tip protrudes from the end of the gauge it is longer than the maximum allowed cartridge length.
To see all Case Gauges available at UniqueTek Click Here.
|Manufactured in Malden Massachusetts, by American workers on American machines!|
Submit a Review...