|
Arredondo Powder Drop Slide with Micrometer
Eliminate galling with Vectan SP2!
If you use Vectan SP2 or other super fine grained powders, you know how the powder can leak around the powder bar and even jam the Dillon powder bar. The Arredondo Accessories plastic Powder Drop Slide has been proven to cure this problem.
We have arranged with Arredondo Accessories to carry their Powder Drop Slide with our Micrometer Powder Bar Kit preinstalled. You get all of the advantages of the Arredondo Powder Drop Slide PLUS our Micrometer Powder Bar Kit™!
Need super small powder drops? These powder drop slides are customized, exclusively for UniqueTek, to allow even smaller powder drops than the standard Arredondo Powder Drop Slide. They will meter down to 0.07 grians (with Win 231) and they meter very small powder drops more accurately than the Dillon extra-small powder bar. If you are loading small centerfire cartridges like the .32 S&W Long for ISSF Center Fire Pistol and other target competition, this is THE powder bar to use!
Advantages:
• Prevents galling with Vectan SP2
• Super small powder drop ... as low as 0.7 grain (with Win 231)
• Micrometer Powder Bar Kit is preinstalled
As with our Micrometer Powder Bar Kit, we send a FREE Excel spread sheet you can use to generate "calibration curves" for each of your gunpowders. With a "calibration curve," you can predict the micrometer setting to give you any desired charge weight for that gunpowder.
(For a larger view, right-click on chart and select "Open Image in New Window".)
"The best money I've ever spend on reloading equipement! It totaly eliminates the tedious work of setting the powder bar to a different load." — Mark D. - Hoboken, Belgium
"All in all, I’d say that your micrometer in combination with the Arredondo plastic powder drop slide is an extremely accurate, and user friendly combination." — Bob N. - Sag Harbor, NY
NOTE: Due to the different orientations of the powder measure on the various Dillon presses, the powder drop slide is available with the micrometer installed in one of two orientations.
• Left side of powder bar — For RL 550B or Super 1050
• Right side of powder bar — For XL 650 or Square Deal B
Although the micrometer index marks will read upside down on the XL 650 or Square Deal B, this orientation allows easier powder weight adjustment. Please select the correct index mark orientation from the pop-up menu. If you do not make a selection, you will be sent the version for the RL 550B/Super 1050 presses.
|