Shell Sorter™

Sorts Brass By Caliber!

The Shell Sorter™ is a simple product designed to reduce the time spent sorting brass by caliber, allowing you to enjoy more time reloading and shooting.

3 Shell Sorter™ Pans	The Shell Sorter™ is comprised of three pans designed to sort several common calibers. The fastest way to sort brass is to stack all three of the Shell Sorter™ pans together with the yellow pan on top, and the black on the bottom. That way all your brass is sorted at the same time. The Shell Sorter™ simply sits on top of a common 5 gallon paint pail. With a few shakes your brass is sorted by caliber. All the trash (e.g. rimfire cases, gravel, dirt, tumbling media) and cases smaller than .38 caliber, end up in the pail.	Shell Sorter™ on 5Gal. Pail (Pail not included)
Stacked Shell Sorter™ Pans

Sorts Shells By Caliber
The three main calibers that most reloaders sort are 45 ACP, 40 S&W, and 9mm. The Shell Sorter™ pans are labeled according to those three main calibers. But the Shell Sorter™ pans do sort many more calibers! The following chart shows some of those calibers and the Shell Sorter™ pan that they end up in.

Yellow	Blue	Black	Pail
45 ACP 45 GAP 44 Mag. 50 AE 243 Win. 308 Win. 7.62x39 45 Colt	40 S&W 10mm 357 Mag. 38 Spl.	9mm 380 ACP 38 Super 223 Rem.	22 rimfire 17 HMR 32 ACP 25 ACP gravel tumble media

Benefits and Features:
• Sort before tumbling and most shells nested inside of each other will come apart with the shaking, making them less likely to jam together with small bits of media.
• The Shell Sorter™ pans can also take the place of your media sifter. Just tumble, pour your brass into the appropriate sorter(s) and shake a bit. Your media drops into the bucket and your brass is ready for the next step.
• Use at the range so that you only bring home brass in the caliber(s) that you reload.
• Great for IDPA and USPSA shooters. If you reload as much as they do, you NEED a Shell Sorter™!
• Made from ABS, a very strong plastic which will give a lifetime of service.


NEW! 380 Shell Sorter™ Plate! = $19.95
Sorting out 380s from 9mm is a difficult task since they are very close in size. The tolerances necessary could not be obtained in plastic, which is why the 380 Sorter Plate is laser cut from 0.088" thick aluminum. Simply place it in the black pan, and sort as normal. The 380's will fall through the plate and remain in the bottom of the black pan. To retrieve the 380's, remove the plate and dump them out.

If you are sorting a large amount of brass, it is faster to sort through all your brass with the three Shell Sorter™ pans as normal. Then place the 380 Sorter Plate in either the blue or yellow pan and re-sort the contents of the black pan through the plate. The 380s will fall through into the bucket, and the 9mm will remain on top of the plate.


Shell Sorter™ 3-Pan Set and 380 Shell Sorter™ Plate! = $55.95
If you purchase the Shell Sorter™ 3-Pan Set and the 380 Shell Sorter™ Plate in the same order, we give a special price break. Just select it from the drop down menu when ordering.

"I can now tell you first hand the case sorter makes short work of sorting cases. I sorted about a thousand cases in just a few minutes. They were a mixed bag of 45, 40, 9mm and 380. The sorter segregated them easily and accurately. I am very pleased as this saves a lot of time especially with the 9mm and 380. The size of those cases are so close sometimes I would get a 380 mixed in with the 9mm in my case feeder, which stops the whole operation. Thanks." — Richard W. - Houston, TX


Patent Pending
Shell Sorter is a trademark of Shell Sorter.