| Items: | 0 |
| Subtotal: | $0.00 |
Primer Handling
 1050 Spent Primer Chute (SKU: T1346-1050)The 1050 Spent Primer Chute™ replaces the blue plastic spent primer cup on the Dillon Super 1050 reloading press. Spent primers are routed through clear PVC tubing into any convenient waste container.
|
 550 Primer Track Bearing (SKU: T1571)The UniqueTek 550 Primer Track Bearing has a 1.4″ extension that supports the primer bar better. Prevents the primer bar from "drooping" and binding while its in the "out" position. It is a drop-in replacement and takes just minutes to install. NOW with ROBAR® NP3® Plating (a Nickel/Teflon composite).
|
 550 Spent Primer Chute (SKU: T1346-550)The 550 Spent Primer Chute™ is a Spent Primer Chute for the Dillon RL 550B Press. Spent primers are routed through clear PVC tubing to any suitable container located under your reloading bench. Virtually eliminates spent primers bouncing out and onto the floor.
|
 550/750 Primer Feed Stop (SKU: T1742)This Primer Feed Stop allows you to temporarily disable the |
 650 Live Primer Chute (SKU: T1306)The UniqueTek 650 Live Primer Chute Prevents primers from falling onto floor. It captures primers and holds them for reuse. The UniqueTek 650 Live Primer Chute is a "drop-in" replacement for the original Dillon Primer Chute (part #16210) and takes just minutes to install. (Note: May not fit certain older XL 650 presses. See product web page for complete details.)
|
 650 Primer Feed Stop Switch (SKU: T1703)This Primer Feed Stop Switch allows you to temporarily disable the XL 650 Primer System. It simply replaces the original Primer Cam and can be switched from ON to OFF in just a few seconds without any tools.
|
 650/750 Spent Primer Chute (SKU: T1346-650)The 650/750 Spent Primer Chute™ replaces the blue plastic spent primer cup and bracket on Dillon XL 650 and XL 750 reloading presses. Spent primers are routed through clear PVC tubing into any convenient waste container, so spent primes simply can't bounce out onto the floor! Includes 650/750 Primer Chute™, 3' Clear PVC Tubing and Instructions. Note: Does not fit certain older model 650 presses. See product page for details before ordering.
|
 Brass Primer Magazine Tube Ends (SKU: T1739)These Brass Primer Magazine Tube Ends replace the plastic "Flexible Orifice" on Dillon Primer Magazine Tubes for RL 550 and XL 750 presses. (T1739)
|
 Dillon Primer Magazine Alignment Gauge Set (SKU: T1775)Dillon Primer Magazine Alignment Gauge Set. For RL 550 and XL 750 priming systems.
|
 Dillon Primer Rod with Holder (SKU: T1562)Dillon Primer Rod with Holder. The Primer Rod is made from aluminum and weighs 0.52oz to give positive primer feeding. The Primer Rod has lines at 100 primers, 75 primers, 50 primers and 25 primers and is accurate to ±1 primer. Also included is a Primer Rod Holder, so when you load primers into the tube, you have a convenient place to hang the Rod. Fits on Dillon Squared Deal 'B', RL 550, XL 650, XL 750, RL 1050, Super 1050 and RL 1100 presses.
|
 Primer System Tag (SKU: T1747)This Primer System Tag clips onto the primer feed system housing and gives you a 1″ x 3″ area upon which you can write the primer type. Comes bundled with 100 Jewelry Tags to label your Primer Pickup Tubes. (T1747)
|
 Primer Tube Stand (SKU: T1567)The UniqueTek Primer Tube Stand holds up to 12 primer pickup tubes, 6 on each side, in a horizontal position. The Stand has a base that is wide enough to be stable and not easily tipped over. It assembles in just seconds and can easily be dismantled to save bench space when not in use.
|
 SDB Spent Primer Chute (SKU: T1346-SDB)The SDB Spent Primer Chute™ replaces the blue plastic spent primer cup on the Dillon Square Deal 'B' reloading press. Spent primers are routed through clear PVC tubing into any convenient waste container.
|
 Swage It S550 (SKU: T1568-5)The Swage It S550 Primer Pocket Swager for the Dillon RL 550B press. Everything that you need to swage .223/5.56mm, .308/7.62mm or any other calibers that utilize small or large primers. Includes Swages for both small and large primers.
|
 Swage It S650 (SKU: T1568-6)The Swage It S650 Primer Pocket Swager for the Dillon XL 650 press. Everything that you need to swage .223/5.56mm, .308/7.62mm or any other calibers that utilize small or large primers. Includes Swages for both small and large primers.
|
 Swage It S750 (SKU: T1568-7)The Swage It S750 Primer Pocket Swager for the Dillon XL 750 press. Everything that you need to swage .223/5.56mm, .308/7.62mm or any other calibers that utilize small or large primers. Includes Swages for both small and large primers.
|